Diaper advertisements frequently claim that "absorbent beads can absorb dozens or even nearly a hundred times their own weight in water" and "can effectively lock in moisture and urine." But how do these beads absorb and retain liquid?
Composed primarily of sodium polyacrylate, SAP exhibits a cross-linked network structure. Its absorption mechanism relies mainly on osmotic pressure. Water molecules penetrate the interior of this network, with some forming strong bonds with the hydrophilic groups on the polymer chains, making them difficult to release post-absorption. The absorbed water exists in three distinct states: strongly bound water via electrostatic adsorption, bound water via hydrogen bonding, and free water residing between the networked polymer chains.
The liquid retention capability of SAP typically refers to its ability to hold water under pressure. Therefore, retention capacity and absorption capacity are two different concepts. As babies adopt various postures during diaper use, different levels of pressure are exerted on the diaper. Thus, the performance of SAP under pressure plays a crucial role in the overall product quality. Consequently, ensuring that SAP maintains sufficient absorption and retention capabilities under pressure has always been a primary focus of industry technological development. Beyond absorption capacity, retention under pressure, absorption rate, permeability, and particle size distribution are also key performance indicators for SAP.
When discussing absorbent beads, another frequently mentioned term is "acrylic acid monomer." What is its relationship with SAP? As mentioned earlier, SAP is formed through the cross-linking polymerization of sodium acrylate. During this polymerization process, some residual monomers are inevitable. Depending on the pH of the environment, residual monomers exist in two forms: acrylic acid and sodium acrylate. Under near-neutral conditions, sodium acrylate is the predominant form. According to national standards, the quantitative analysis of residual monomers is conducted in an acidic environment, with the results reported as acrylic acid. Hence, these residual monomers are colloquially referred to as "acrylic acid monomers."
Due to varying polymerization processes, the morphology, absorption performance (e.g., absorption capacity, absorption rate, permeability), and acrylic acid monomer residue levels of SAP differ. Key performance indicators of SAP absorption often exhibit a trade-off relationship, making it difficult to evaluate SAP materials based on a single standard.
Consumers are highly concerned about the safety implications of monomer residues in SAP. From a regulatory perspective, China's national standard GB/T 22875-2018 (Super Absorbent Polymer for Diapers and Sanitary Napkins) sets an upper limit for residual monomers in this raw material. For SAP used in baby diapers (pads/liners), the residual monomer (calculated as acrylic acid) must not exceed 800 mg/kg. Currently, there are only standardized testing methods for detecting residual monomers within the SAP itself.
There is no reliable standard method for measuring the exudation of residual monomers from the diaper product during actual use. Typically, testers cut the product into pieces or extract the SAP particles to test the residual monomer content according to GB/T 22875. However, this procedure cannot determine the actual amount of residual monomer that migrates to the product's surface and contacts the skin during use. Only test results obtained by nationally authorized and accredited testing institutions, using validated methods within their accredited scope, are legally recognized.
Regarding product safety, the European Disposables and Nonwovens Association (EDANA) has conducted in-depth research on acrylic acid monomer residues in diapers. Based on a risk assessment framework utilizing actual exposure levels, EDANA concluded that residual acrylic acid monomers in SAP pose no risk to consumers from either systemic or local skin toxicity perspectives. Residual monomer levels up to 1000 mg/kg in absorbent hygiene products (including baby diapers) are considered safe. Furthermore, SAP does not directly contact a baby's skin; it is dispersed within the absorbent core, which is covered by multiple layers such as the ADL and top sheet. The amount of residual monomer that could potentially back-flow to the skin surface with urine is virtually negligible.
Is lower residual monomer always better? Basic guiding principles for product safety issued by China's State Administration for Market Regulation (SAMR) clearly state that no substance is absolutely safe; safety is a balance of technology, cost, and risk. Every substance has a safety threshold based on risk assessment, even essential elements like sunlight, oxygen, and water. When trace impurities are within the specified safety limits, the product should be considered safe. When used under normal, reasonable, and foreseeable conditions, these compliant products will not harm human health.
While ensuring product safety, the industry should encourage the development and technological innovation of absorbent hygiene products. The industry should widely accept SAP materials prepared through various polymerization processes to meet different performance needs, allowing manufacturers to select materials based on comprehensive considerations of product design and cost. Conversely, excessively pursuing lower residual monomer levels may compromise SAP's absorption and retention performance, negatively impacting the consumer experience. It may also lead to higher costs passed on to consumers, which is detrimental to fostering healthy industry competition.
